Toyota Corolla

1992-1998 of release

Repair and operation of the car


Toyota Corolla
- 1. Maintenance instruction
   1.2. Codes of models
   1.3. Control panel
   + 1.4. Combination of devices
   + 1.5. Governing bodies and instrumentations
   - 1.6. Launch of the engine and driving
      1.6.1. Check before launch of the engine
      1.6.2. Check after launch of the engine
      1.6.3. Methods of driving
      - 1.6.4. Towage of the trailer
         1.6.4.1. Installation of the hook-on device
      1.6.5. Actions at refusal of launch of the engine
      1.6.6. Obligatory set of tools and spare wheel
      1.6.7. Replacement of a wheel
      1.6.8. Towage of the car
      1.6.9. Motor compartment
      1.6.10. Arrangement of safety locks
      1.6.11. Check of level of oil in the engine
      1.6.12. Choice of brand of oil
      1.6.13. Check of level of cooling liquid
      1.6.14. Composition of cooling liquid
      1.6.15. Check of pressure in tires
      1.6.16. Replacement of tires
      1.6.17. Shift of wheels
      1.6.18. Installation of winter tires and chains
      1.6.19. Precautionary measures for cast aluminum disks
      1.6.20. Check of an external condition of the battery
      1.6.21. Check of level of electrolyte
      1.6.22. Battery charging
      1.6.23. Check and replacement of safety locks
      + 1.6.24. Replacement of lamps
   1.7. Specifications
   1.8. Adjusting data, filling capacities and liquids
   + 1.9. Possible malfunctions
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Suspension bracket and steering
+ 11. Body
+ 12. Electric equipment



bbeb4949

1.6.4.1. Installation of the hook-on device
GENERAL INFORMATION

The manufacturer recommends to use the coupling device (an arm and a spherical support) of Toyota.

Installation sites of an arm and spherical support of the coupling device are given in tables, the sizes are specified in mm.

Sedan
A
804
J
415
B
878
K
452
With
919
L
465
D
936
M
474
E
1067
N
778
F
747
O
829
G
814
P
838
H
397
Q
1066
I
400

Hatchback
A
804
K
414
B
881
L
414
With
893
M
421
D
927
N
447
E
970
O
471
F
1067
P
472
G
551
Q
636
H
633
R
666
I
636
S
675
J
407
T
889

Versatile person
A
804
J
464*1 441*2
B
844
K
477*1 464*2
With
919
L
743
D
936
M
774
E
1067
N
810
F
409*1 936*2
O
826
G
412*1 399*2
P
829
H
427*1 414*2
Q
1050
I
454*1 441*2

* 1 for cars with a wheel formula 4х4.
* 2 for other cars.

Tires

Check pressure in car tires (see subsection 2.4).

Pressure in tires of the trailer has to correspond specified in the instruction of the manufacturer of the trailer for this full mass of the trailer.

Light alarm system

At each connection of the trailer check serviceability of stoplights and indexes of turn. Direct merging of conducting can lead to failure of electric equipment of the car and to failure of the light alarm system.

Towing in the period of a running in

The manufacturer does not recommend to tow the trailer the car with the new engine and units and details of transmission and running gear (a box, differential, bearings of wheels, etc.) throughout the first 800 km of a run.

Maintenance

Because of additional loading when towing the trailer the car demands more frequent leaving and maintenance.

Check an inhaling of bolts of fastening of an arm and a spherical support of the coupling device through each 1000 km of towing.

Security measures

Observe cargo standards (cm. subsection 1.6.4).

Be convinced of reliability of fastening of the placed freight.

At insufficient visibility of the transport going behind establish additional rear-view mirrors. The provision of both additional mirrors has to be regulated to provide the sufficient review behind.