1992-1998 of release
Repair and operation of the car
- 1. Maintenance instruction
1.2. Codes of models
1.3. Control panel
+ 1.4. Combination of devices
+ 1.5. Governing bodies and instrumentations
- 1.6. Launch of the engine and driving
1.6.1. Check before launch of the engine
1.6.2. Check after launch of the engine
1.6.3. Methods of driving
+ 1.6.4. Towage of the trailer
1.6.5. Actions at refusal of launch of the engine
1.6.6. Obligatory set of tools and spare wheel
1.6.7. Replacement of a wheel
1.6.8. Towage of the car
1.6.9. Motor compartment
1.6.10. Arrangement of safety locks
1.6.11. Check of level of oil in the engine
1.6.12. Choice of brand of oil
1.6.13. Check of level of cooling liquid
1.6.14. Composition of cooling liquid
1.6.15. Check of pressure in tires
1.6.16. Replacement of tires
1.6.17. Shift of wheels
1.6.18. Installation of winter tires and chains
1.6.19. Precautionary measures for cast aluminum disks
1.6.20. Check of an external condition of the battery
1.6.21. Check of level of electrolyte
1.6.22. Battery charging
1.6.23. Check and replacement of safety locks
+ 1.6.24. Replacement of lamps
1.8. Adjusting data, filling capacities and liquids
+ 1.9. Possible malfunctions
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Suspension bracket and steering
+ 11. Body
+ 12. Electric equipment
Nuts of wheels. Be convinced available all nuts, reliability of their inhaling.
Existence of dribbles. After the long parking check existence of dribbles of oil, fuel, liquids (emergence of drops of moisture after use of the conditioner is allowed).
Light devices. Be convinced of serviceability of headlights, indexes of turn and other devices. Check correctness of adjustment of headlights.
Check pressure in a spare wheel, be convinced available a jack and a key for nuts of wheels.
Check a condition of seat belts, durability of fastening of buckles.
Be convinced of serviceability of all light indexes signaling about malfunction of various systems, illuminations of a scale of devices and a heater of glass.
Check adjustment of a pedal of a brake.
Check existence of spare safety locks. The safety locks calculated on all currents which values are specified on a cover of the assembly block have to be included in the package.
Check in a motor compartment
Check the level of cooling liquid (see subsection 2.3).
Check electrolyte level in battery sections.
Check a condition of the case of the battery and power cables, reliability of fastening of cables.
Check a condition of conducting.
Check a condition of fuel hoses and tubes.