Discharge of water from the fuel filter
|
|
The arrow specified a drain stopper. |
Antifreeze (ethylene glycol) and anticorrosive additives are a part of cooling liquid.
Liquid with anticorrosive additives can be applied only in those regions in which freezing is excluded.
As such additives Radiator Conditioner of Toyota or equivalent are recommended.
Properties of frost-resistant and anticorrosive additives and the recommended proportions of water are specified on a container by the manufacturer. Capacity of the cooling system is specified in subsection 1.8. Antifreeze is recommended to be mixed with water in the ratio 50:50 or in such ratio which provides a freezing point not above -35 °C.
It is forbidden to apply antifreeze on a spirit basis or to fill in clear water in the cooling system.
Fire of a control lamp of the fuel filter indicates that from the filter it is necessary to merge water immediately.
| PERFORMANCE ORDER |
| 1. Substitute the pallet under a drain stopper. |
| 2. Turn off a stopper counterclockwise, on 2–2,5 turns (at a bigger otvorachivaniye it will be watered on the periphery of a stopper). |
| 3. Pump up the pump fuel to its effluence. |
| 4. Tighten a stopper by hand (not to use the tool). |
|
|
