| 1. Clamp in a vice a head of cylinders for the bracket attached to one of hairpins of a final collector. |
| 2. Remove the camshaft. Turn off bolts of covers of bearings a cross on a cross from edges to the middle and uncover. |
|
|
3. Removal and installation of valves requires the special tool shown in the drawing. Tighten the tool before compression of a spring and then remove crackers of valves. (For removal of valves it is possible to use also a piece of a tube.) |
| 4. Take out cups of springs and a spring. Remove maslootrazhatelny caps from cores of valves and at once throw out as they are subject to replacement. You hold all details of each valve together. |
| 5. Lay valves in the turned cardboard box and near each valve write its number. |
| 6. Remove all details which remained on a head of cylinders. |
