Toyota Corolla

1992-1998 of release

Repair and operation of the car

Toyota Corolla
- 1. Maintenance instruction
   1.2. Codes of models
   1.3. Control panel
   + 1.4. Combination of devices
   + 1.5. Governing bodies and instrumentations
   - 1.6. Launch of the engine and driving
      1.6.1. Check before launch of the engine
      1.6.2. Check after launch of the engine
      1.6.3. Methods of driving
      + 1.6.4. Towage of the trailer
      1.6.5. Actions at refusal of launch of the engine
      1.6.6. Obligatory set of tools and spare wheel
      1.6.7. Replacement of a wheel
      1.6.8. Towage of the car
      1.6.9. Motor compartment
      1.6.10. Arrangement of safety locks
      1.6.11. Check of level of oil in the engine
      1.6.12. Choice of brand of oil
      1.6.13. Check of level of cooling liquid
      1.6.14. Composition of cooling liquid
      1.6.15. Check of pressure in tires
      1.6.16. Replacement of tires
      1.6.17. Shift of wheels
      1.6.18. Installation of winter tires and chains
      1.6.19. Precautionary measures for cast aluminum disks
      1.6.20. Check of an external condition of the battery
      1.6.21. Check of level of electrolyte
      1.6.22. Battery charging
      1.6.23. Check and replacement of safety locks
      - 1.6.24. Replacement of lamps
         1.6.24.1. Headlights
         1.6.24.2. Latch of an air duct of the air filter
         1.6.24.3. Parking lamps
         1.6.24.4. Indexes of turn
         1.6.24.5. The duplicating braking signals
         1.6.24.6. Lamps of illumination of registration plate
   1.7. Specifications
   1.8. Adjusting data, filling capacities and liquids
   + 1.9. Possible malfunctions
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Suspension bracket and steering
+ 11. Body
+ 12. Electric equipment

1.6.24.1. Headlights

CARS WITH THE ENGINE 2E

PERFORMANCE ORDER

	1. Open a cowl. Disconnect the conducting socket, turn a plastic cover counterclockwise and uncover. If the socket does not give in, then shake it.
	2. Remove a rubber cover.
	3. Get a spring bracket and remove a lamp. Establish a new lamp and a spring bracket. At installation combine assembly ledges on a lamp with grooves in the panel.
	4. Dress densely rubber cover. Make sure that the cover is correctly dressed and densely adjoins to a headlight and to the socket.
	5. Establish a plastic cover so that the tag of LOCK was directed up, and turn clockwise. Insert the socket. After replacement of a lamp to regulate a bunch of headlights there is no need. If adjustment is broken, then address to car service.

OTHER MODELS

PERFORMANCE ORDER

1. Open a cowl.
	2. For access to a left headlight remove an air duct of the air filter, having got a latch (cm. subsection 1.6.24.2).
	3. Disconnect the conducting socket, turn a plastic cover counterclockwise and uncover. If the socket does not give in, then shake it.
	4. Remove a rubber cover.
	5. Get a spring bracket and remove a lamp. Establish a new lamp and a spring bracket. At installation combine assembly ledges on the lamp case with grooves in the panel.
	6. Dress densely rubber cover. Make sure that the cover is correctly dressed and densely adjoins to a headlight and to the socket.
	7. Establish a plastic cover so that the tag of LOCK was directed up, and turn clockwise. Insert the socket with conducting. Establish an air duct of the filter and fix by a latch. After replacement of a lamp to regulate a bunch of headlights there is no need. If adjustment is broken, then address to car service.

home