Toyota Corolla

1992-1998 of release

Repair and operation of the car

Toyota Corolla
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Suspension bracket and steering
- 11. Body
   11.1. Maintenance and repair
   11.2. Vinyl finishing
   11.3. Upholstery and rugs
   11.4. Repair of insignificant damages of a body
   11.5. Repair of considerable damages of a body
   11.6. Loops and locks
   11.7. Windshield and motionless glasses
   11.8. Cowl
   11.9. Trunk lid
   11:10. A back door (models with a body "Station wagon")
   11:11. Basic rack of a back door
   11:12. Decorative panel of a door
   11:13. Door
   11:14. Door latch, cylinder of the lock and handle
   11:15. Door windowpane
   11:16. Bumpers
   11:17. External mirror
   11:18. Seats
   11:19. Frame of a combination of devices
   11:20. Glove compartment
   11:21. Central decorative panel
   11:22. Casing of a steering column
   11:23. Lower panel of finishing of a steering column
   11:24. Console
   11:25. Dashboard
   11:26. Front grille
   11:27. Ventilating grate of a cowl
   11:28. Seat belts
+ 12. Electric equipment


11:25. Dashboard


The dashboard and the related details – the image in parts

1. Finishing of a forward rack
2. Lower finishing of a forward rack
3. Overlay for a step of a forward door
4. The heater pipeline to a ventilating grate of N4
5. Airbag of safety of the passenger
6. Dashboard
7. Facing of an instrument guard
8. Connector cover
9. Lower panel
10. Glove compartment door
11. Hours
12. Radio
13. Facing of the central panel of an instrument guard
14. Lower part of facing of the central panel of an instrument guard
15. Ashtray
16. Top panel of the console
17. Gearshift opening frame
18. Back box of the console
19. Lower finishing of the central panel
20. Heater control unit
21. N2 prop
22. N1 prop
23. Lower facing panel
24. The pipeline from a heater to a ventilating grate
25. Casing of a steering column
26. Steering column
27. Steering wheel
28. Combinational switch
29. Layout knot of facing of the central panel
30. Dashboard
31. Side outlet of the pipeline of the deflector of a heating system
32. The pipeline from a heater to a ventilating grate of N3
33. The strengthening dashboard element
34. Central outlet of the deflector of a heating system
35. Arm
36. Side outlet of the pipeline of the deflector of a heating system N2


1. Disconnect a wire of "weight" from the accumulator.
2. Remove the module of the airbag of safety of the driver and a steering wheel (see subsection 10.16).
3. Remove a glove compartment (see subsection 11.20), disconnect the electric socket of the module of the passenger airbag and remove the safety cushion module.


You store safety airbags in the safe place the face (the party of finishing) up.

4. Remove a dashboard frame (see subsection 11.19) and remove the dashboard.
5. Remove the central decorative panel (see subsection 11.21), remove the audio system (see subsection 12.11) and the control panel of a heater and the conditioner (see subsection 4.10).
6. Remove casings of a steering column (see subsection 11.22) and the lower panel of finishing (see subsection 11.23).
7. Remove panels of the forward and back console (see subsection 11.24).
8. Remove overlays for steps of a forward door and decorative moldings of a forward rack on both parties.
9. Remove the ignition lock cylinder (see subsection 12.8). Unscrew the bolts fixing a steering column to the dashboard and the strengthening prop, and lower a steering column.
10. By means of the lever carefully take the left ventilating pipeline, disconnect electric sockets and unscrew a fixing bolt of the dashboard behind the pipeline.
11. The main hank of wires of the dashboard will remain attached to it when you remove the panel. Disconnect all remained sockets. Unfasten the block of fuses from a body and remove it together with the panel and wires. Disconnect electric sockets from the case of a heater and disconnect wire conclusions of grounding from the central prop.
12. Unscrew the remained bolts of fastening of the dashboard, strong clamp the panel and pull it precisely towards a back part of the car to unfasten five clamps located along the windshield basis. Remove the dashboard from the car.


1. Carefully remove wires and pipelines of ventilation and a heating system and move them to the new dashboard.
2. Place the dashboard into place, press on it that five clamps entered gearing with pads, and screw up fixing bolts.
3. The rest of the procedure of installation is made in the return sequence.