Toyota Corolla
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Suspension bracket and steering
- 11. Body
11.1. Maintenance and repair
11.2. Vinyl finishing
11.3. Upholstery and rugs
11.4. Repair of insignificant damages of a body
11.5. Repair of considerable damages of a body
11.6. Loops and locks
11.7. Windshield and motionless glasses
11.8. Cowl
11.9. Trunk lid
11:10. A back door (models with a body "Station wagon")
11:11. Basic rack of a back door
11:12. Decorative panel of a door
11:13. Door
11:14. Door latch, cylinder of the lock and handle
11:15. Door windowpane
11:16. Bumpers
11:17. External mirror
11:18. Seats
11:19. Frame of a combination of devices
11:20. Glove compartment
11:21. Central decorative panel
11:22. Casing of a steering column
11:23. Lower panel of finishing of a steering column
11:24. Console
11:25. Dashboard
11:26. Front grille
11:27. Ventilating grate of a cowl
11:28. Seat belts
+ 12. Electric equipment
|
Prevention
Later models are equipped by pyrotechnic natyazhitel of seat belts. Do not try to remove knot of a natyazhitel of a seat belt if it is established as if definitely not to observe the correct procedure of removal, it is possible to be traumatized. For carrying out any works which concern removal and installation of seat belts to specialists of car repair shop.
Typical details of seat belts on cars with a body like "Sedan"
|
1. Seatback
2. Seat pillow
3. Humeral anchor
4. Internal seat belt
5. Top part of finishing of the central rack
6. Bolt of fastening of a seat belt
7. Adjustable anchor
8. External anchor of a seat belt
|
9. Finishing of a forward rack
10. Lower part of finishing of a forward rack
11. Internal part of side finishing of a roof
12. Overlay for a step of a back rack
13. Lower part of finishing of the central rack
14. Overlay for a step of a forward rack
15. Seatback sidewall |
Typical details of seat belts on cars with a body like "Station wagon"
1. Cover of a back rack
2. Latch of the lock of a back seat
3. Cover of a latch of the lock of a back seat
4. Side panel of finishing
5. Quadrangular decorative floor cover of a clip
6. Hinge of a back seat
7. Humeral anchor
8. Seatback assembled
|
9. External anchor of a belt
10. Central belt
11. Flooring plate
12. Back part of finishing of a floor
With a body back cover:
13. Suspended arm of a cover of the lock
14. Cover of a back rack
15. Back cover |
Check
| PERFORMANCE ORDER |
| 1. Check seat belts, latches, uvulas of latches and the directing loops for existence of any signs of damages or wear. |
| 2. Make sure that the reminding bulb of a seat belt is lit when the key is turned. |
| 3. Seat belts are designed so that to be blocked at a sudden stop or blow, and at the same time to provide free movement under normal conditions of the movement. Natyazhiteli have to hold a belt on your breast during the movement and take up a belt when the latch is uncoupled. |
| 4. If when conducting check malfunctions of system of seat belts were found, to replace all details which it is necessary, having addressed specialists of car repair shop. |
|
|
|
