Prevention
These models are equipped with safety airbags. The safety cushion is in a ready state and can be developed (to be inflated) at any time if the accumulator is connected. To avoid casual expansion (and a possible trauma), turn the ignition key in position of LOCK and disconnect a wire of "weight" from the accumulator every time when you work about details of airbags of safety. After the accumulator will be disconnected, wait, at least, two minutes before beginning work (the system has the reserve condenser which has to be discharged completely). For obtaining more detailed information (see subsection 12.24).
Removal and installation
| PERFORMANCE ORDER |
| 1. Disconnect a wire of "weight" from the accumulator. |
|
2. Unscrew two bolts on the top part of a frame. |
|
3. Disconnect two clips at bottom edges, having raised them by means of the screw-driver |
|
4. Strong clamp a frame and remove it |
| 5. Installation is made in the return sequence. |
|
|
