Toyota Corolla

1992-1998 of release

Repair and operation of the car

Toyota Corolla
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Suspension bracket and steering
- 11. Body
   11.1. Maintenance and repair
   11.2. Vinyl finishing
   11.3. Upholstery and rugs
   11.4. Repair of insignificant damages of a body
   11.5. Repair of considerable damages of a body
   11.6. Loops and locks
   11.7. Windshield and motionless glasses
   11.8. Cowl
   11.9. Trunk lid
   11:10. A back door (models with a body "Station wagon")
   11:11. Basic rack of a back door
   11:12. Decorative panel of a door
   11:13. Door
   11:14. Door latch, cylinder of the lock and handle
   11:15. Door windowpane
   11:16. Bumpers
   11:17. External mirror
   11:18. Seats
   11:19. Frame of a combination of devices
   11:20. Glove compartment
   11:21. Central decorative panel
   11:22. Casing of a steering column
   11:23. Lower panel of finishing of a steering column
   11:24. Console
   11:25. Dashboard
   11:26. Front grille
   11:27. Ventilating grate of a cowl
   11:28. Seat belts
+ 12. Electric equipment

11:13. Door

Removal

PERFORMANCE ORDER

1. Remove the decorative panel of a door (see subsection 11.12). Disconnect any electric connections and push them through an opening at doors that they did not interfere with removal.
	2. Place a jack or trestle under a door or ask the assistant to support a door when you unscrew bolts.
Prevention If the jack or goats are used, place rags between them and a door to protect the painted door surface.
	3. Unscrew a strut bolt (it is specified by an arrow) the limiter of opening of a door.
	4. Before easing or unscrewing of bolts (are specified by shooters) put marks around them, having marked their location.
5. Unscrew bolts of fastening of a loop to a door and carefully remove a door. Installation is made in the return sequence.

Adjustment

In installation time be convinced that the door is located correctly. If it is necessary, adjust it as it is described below:

PERFORMANCE ORDER

	1. Vertical and longitudinal adjustment is carried out by weakening of bolts of fastening of loops to a body and movement of a door as it is necessary. Special curved adaptation can be necessary for you to reach some bolts.
	2. Vertical adjustment and adjustment of depth of landing of a door are carried out by weakening of bolts of fastening of side loops of a door and movement of a door as it is necessary. Special curved adaptation can be necessary for you to reach some bolts.
	3. The latch of the door lock can also be adjusted down and across to provide reliable gearing with the locking mechanism. It can be made, having weakened fixing bolts (are specified by shooters) and moving a latch as it is necessary.

home