Toyota Corolla

1992-1998 of release

Repair and operation of the car



Toyota Corolla
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
- 10. Suspension bracket and steering
   10.1. Specifications
   10.2. Rack of a suspension bracket (lobby)
   10.3. Suspension bracket rack
   10.4. Stabilizer of cross stability (forward suspension bracket) and plug
   10.5. Suspension bracket lever
   10.6. Spherical hinges
   10.7. Rotary fist and nave
   10.8. Nave and hug bearing (forward wheel)
   10.9. Stabilizer of cross stability (back suspension bracket) and plug
   10:10. Rack of a suspension bracket (back)
   10:11. Longitudinal draft
   10:12. Cross drafts of a suspension bracket
   10:13. Nave and bearing (back wheel)
   10:14. Arm of a nave of a back wheel
   10:15. Steering
   10:16. Steering wheel
   10:17. Tips of steering drafts
   10:18. Steering transfer
   10:19. Pump of system of strengthening of steering
   10:20. System of strengthening of steering
   10:21. Wheels and tires
   10:22. Adjustment of angles of installation of wheels
+ 11. Body
+ 12. Electric equipment



bbeb4949

10:13. Nave and bearing (back wheel)

GENERAL INFORMATION

Elements of an arm of a nave, nave and the bearing, nave of a back wheel (model with drum brakes)

1. Sensor of speed of rotation of a wheel of the AVS system
2. Arm of a nave of a back wheel
3. Sealing ring
4. Nave of a back wheel
5. Brake drum
6. Nave bolt
7. Models without AVS
8. Bearing
9. Nave of a back wheel
10. Guard of a back brake
11. Brake hose
12. Clip

Prevention

The dust formed as a result of wear of brake shoes contains the asbestos hazardous to health. It is forbidden to use solvents on the basis of gasoline for cleaning of the mechanism of brakes. Use only special cleaner for the mechanism of brakes.

In view of need of use of the special equipment and tools for replacement of the bearing, the nave and the bearing independently is not recommended to be sorted. You can independently remove a nave with the bearing and send them to auto repair shop for replacement of the bearing.


Removal

PERFORMANCE ORDER
1. Turn off nuts of fastening of a wheel, lift the car and its stanovita on support. Remove a wheel.
2. Remove the brake drum from a nave (on models with back drum brakes) (see subsection 9.8) or remove a brake disk (see subsection 9.7) and a brake support (on models with back disk brakes) (see subsection 9.6).
3. Turn off four bolts of fastening of a nave to a nave arm, access to which can be got through a big opening in a nave, rotating a nave flange (turn a flange and combine a big opening on a flange with each of bolts in turn).
4. Remove a nave together with the bearing, having got them via the mechanism of brakes.
5. On models on which there is no system of anti-blocking of brakes the nave of a back wheel can be removed from the bearing for its replacement. In view of need of use of special tools for performance of this operation, the nave and the bearing need to be given to auto repair shop to squeeze out the old bearing of a nave and to establish new (you can use an old nave, it in good shape so far). Check that the fixing nut of a nave was tightened till the required inhaling moment (see subsection 10.1). On models with system of anti-blocking of brakes, the nave and the bearing need to be replaced together.

Installation

PERFORMANCE ORDER
1. Turn off nuts of fastening of a wheel, lift the car and its stanovita on support. Remove a wheel.
2. Oil a new sealing ring and establish it on an external circle of the speaker of a rim on a guard of a back brake.
3. Do not lower a sealing ring down a rim to the guard – when you establish a nave and the bearing, the sealing ring will get to the flute on an internal surface of the central opening of a nave when twisting fixing bolts.
4. Establish a nave and the bearing on an arm of a nave and combine openings in a nave with openings on a guard of a back brake. Insert bolts. For installation of bolts in openings it is possible to use a magnet. After installation of all four bolts, tighten them till the required moment of an inhaling specified in the section of technical characteristics at the beginning of this chapter.
5. Install the brake drum or a brake disk and a support, then establish a wheel. Lower the car on the earth and tighten nuts of fastening of the wheel until an inhaling specified in the section of technical characteristics in the corresponding chapter.