Toyota Corolla

1992-1998 of release

Repair and operation of the car

Toyota Corolla
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
- 10. Suspension bracket and steering
   10.1. Specifications
   10.2. Rack of a suspension bracket (lobby)
   10.3. Suspension bracket rack
   10.4. Stabilizer of cross stability (forward suspension bracket) and plug
   10.5. Suspension bracket lever
   10.6. Spherical hinges
   10.7. Rotary fist and nave
   10.8. Nave and hug bearing (forward wheel)
   10.9. Stabilizer of cross stability (back suspension bracket) and plug
   10:10. Rack of a suspension bracket (back)
   10:11. Longitudinal draft
   10:12. Cross drafts of a suspension bracket
   10:13. Nave and bearing (back wheel)
   10:14. Arm of a nave of a back wheel
   10:15. Steering
   10:16. Steering wheel
   10:17. Tips of steering drafts
   10:18. Steering transfer
   10:19. Pump of system of strengthening of steering
   10:20. System of strengthening of steering
   10:21. Wheels and tires
   10:22. Adjustment of angles of installation of wheels
+ 11. Body
+ 12. Electric equipment

10.5. Suspension bracket lever

Removal

PERFORMANCE ORDER

1. Turn off nuts of fastening of a wheel, lift a forward part of the car, establish it on support and remove a wheel.
	2. Turn off the bolt and two nuts (are specified by shooters) fixing the suspension bracket lever to a rotary fist.
	3. By means of a lomik take away the suspension bracket lever from a rotary fist and remove the suspension bracket lever from the spherical hinge.
	4. To release forward a krepleniyerychag of a suspension bracket – remove a forward hinged bolt (it is specified by an arrow).
	5. To release back fastening of the lever of a suspension bracket to a cross-piece on release models since 1996 – remove a back hinged bolt (it is specified by an arrow).
6. To release back fastening of the lever of a suspension bracket to a cross-piece on models of earlier years of release – turn off the nut fixing a hinged bolt to an arm and the plug (see rice. Elements of the stabilizer of cross stability and lever of a forward suspension bracket).
Prevention It is not necessary to turn off a nut and two bolts fixing a lever arm suspension brackets if only you do not need to replace the plug.
7. Remove the suspension bracket lever.

Survey

PERFORMANCE ORDER

Check the suspension bracket lever for existence of deformations and its plug on existence of wear tracks, having replaced them if it is necessary. Do not try to level the bent suspension bracket lever, replace it.

Installation

PERFORMANCE ORDER

1. Installation is carried out upside-down removals (see rice. Elements of the stabilizer of cross stability and lever of a forward suspension bracket).

2. Tighten all threaded connections till the required moments of an inhaling specified in the section of technical characteristics at the beginning of this chapter.

Prevention

Before twisting of hinged bolts, lift the external end of the lever by means of a jack to bring the lever into situation in which it is when the car costs on wheels.

3. Establish a wheel and acquire nuts of fastening of a wheel. Lower the car on the earth and tighten nuts till the required moment of an inhaling specified in the section of technical characteristics in the corresponding chapter.

4. It is recommended to check adjustment of forward wheels and if it is necessary, to adjust.

home