Toyota Corolla

1992-1998 of release

Repair and operation of the car

Toyota Corolla
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
- 7. Transmissions
   - 7.1. Mechanical transmission
      7.1.1. Specifications
      7.1.2. The switching ropes
      7.1.3. Gear shifting lever
      7.1.4. Switch of headlights of a backing
      7.1.5. Removal and installation of the transmission
      7.1.6. Transmission partition
   + 7.2. Automatic transmission
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Suspension bracket and steering
+ 11. Body
+ 12. Electric equipment

7.1.2. The switching ropes

GENERAL INFORMATION

The switching ropes and the unit of the lever of gear shifting (model of release of 1993-1995)

1. Fastening of the N2 plug п
ereklyuchayushchy rope
2. N2 plug
3. N1 plug
4. Fastening of the N1 plug of the switching rope

5. Fixing arm of the console
6, 7. The switching rope
8. Unit of the lever of gear shifting (Type A)
9. Fixing arm
10. Unit of the lever of gear shifting (Type B)

The switching ropes and the unit of the lever of gear shifting (release model since 1996)

1. Unit of the lever of an adventure of transfers
2. Fixing arm of N1 of the console of the lever of gear shifting
3. Check
4. Washer
5. Unit of the lever of an adventure of transfers
6. Fixing arm of N1 of the console of the lever of gear shifting
7. The switching rope
8. Clip

9. Check
10. Washer
11. Check
12. Washers
13. Clip
14. Fastening
15. Plugs
16. Fastenings of ropes
17. The switching rope
18. Clip

Removal and installation

PERFORMANCE ORDER

	1. In a motive compartment remove checks and washers (are specified by shooters) and disconnect ropes from the cranked lever of gear shifting.
	2. Remove fastenings of ropes from an arm (are specified by shooters) by means of flat-nose pliers.
3. In salon remove the gear shifting lever console (see subsection 11.24).
4. Remove fastenings of ropes from the lower party of the unit of the lever of gear shifting (see rice. The switching ropes and the unit of the lever of gear shifting (model of release of 1993 - 1995 of) or rice. The switching ropes and the unit of the lever of gear shifting (release model since 1996)).
	5. Remove checks and washers from the ends of ropes (it is specified by an arrow) and disconnect ropes from the gear shifting lever.
6. Walk along ropes to a partition of a body and remove the pressurizing plugs. Stretch ropes through a partition.
7. Installation is carried out upside-down removals.

home