Toyota Corolla

1992-1998 of release

Repair and operation of the car



Toyota Corolla
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
- 4. Cooling systems, heating
   4.1. Specifications
   4.2. Antifreeze
   4.3. Thermostat
   4.4. Fan and relay of turning on of the fan
   4.5. Radiator and broad tank
   4.6. Pump of cooling liquid
   4.7. Sensor of temperature of cooling liquid
   4.8. Fan block
   4.9. Heater radiator
   + 4.10. Control panel of a heater and conditioner
   4.11. Vlagootodelitel of the conditioner
   4.12. Compressor
   4.13. Condenser
   4.14. Evaporator and broad valve
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Suspension bracket and steering
+ 11. Body
+ 12. Electric equipment



bbeb4949

4.11. Vlagootodelitel of the conditioner

Removal

PERFORMANCE ORDER
1. Depressurize the conditioner and remove coolant in service of Toyota car service or in a specialized workshop.
2. Remove a decorative lattice (see subsection 11.26).
3. Disconnect coolant supply tubes from a moisture separator and muffle tubes to prevent moisture hit. It is necessary to unscrew one screw and one bolt (are specified by shooters).
4. Turn off a bolt and remove a receiver from an arm.

Installation

PERFORMANCE ORDER
1. The receiver is established upside-down.
2. Fill system with coolant in the same workshop in which depressurization was carried out.