Toyota Corolla

1992-1998 of release

Repair and operation of the car

Toyota Corolla
+ 1. Maintenance instruction
- 2. Maintenance
   2.1. Specifications
   2.2. Arrangement of knots and details
   2.3. Check of level of liquids
   2.4. Check of a condition of tires and pressure in tires
   + 2.5. Servicing through each 5000 km or 3 months
   - 2.6. Servicing through each 12000 km or 6 months
      2.6.1. Check and replacement of brushes of screenwash
      2.6.2. Check and adjustment of a free wheeling of a pedal of coupling
      2.6.3. Check of a state and charging of the rechargeable battery
      2.6.4. Drive belt
      2.6.5. Check of a condition of hoses in a motor compartment
      2.6.6. Check of the cooling system
      2.6.7. Shift of wheels
   + 2.7. Servicing through each 24000 km or 12 months
   + 2.8. Servicing through each 50000 km or 2 years
   + 2.9. Servicing through each 100000 km or 4 years
+ 3. Engines
+ 4. Cooling systems, heating
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Suspension bracket and steering
+ 11. Body
+ 12. Electric equipment

2.6.2. Check and adjustment of a free wheeling of a pedal of coupling

PERFORMANCE ORDER

	1. Slightly press a pedal to feeling of resistance to movement and by means of a small steel ruler measure distance from the provision of completely released pedal to that place in which resistance to the further course begins to be felt.
2. The free wheeling of a pedal of coupling has to be in normal limits. If the free wheeling does not meet standard, then it should be adjusted.
	3. Release a lock-nut (1) of a fork of a pusher of the main cylinder about a pedal. Adjustment of a free wheeling of a pusher of the main cylinder of coupling, height of a pedal (4) and free wheeling of a pedal (3) is carried out by an otpuskaniye of lock-nuts and rotation of a pusher or adjusting bolt (2).
4. Rotating a pusher, adjust a free wheeling of a pedal of coupling and a free wheeling of a pusher.
5. Tighten a lock-nut.
6. After adjustment of a free wheeling of a pedal of coupling check distance to a pedal from an anticorrosive covering of a body floor.
7. If this distance differs from standard, then turn off a lock-nut of an adjusting bolt and rotate a bolt before receiving the necessary distance. After adjustment tighten a nut.

home