Toyota Corolla

1992-1998 of release

Repair and operation of the car

Toyota Corolla
+ 1. Maintenance instruction
- 2. Maintenance
   2.1. Specifications
   2.2. Arrangement of knots and details
   2.3. Check of level of liquids
   2.4. Check of a condition of tires and pressure in tires
   + 2.5. Servicing through each 5000 km or 3 months
   + 2.6. Servicing through each 12000 km or 6 months
   + 2.7. Servicing through each 24000 km or 12 months
   + 2.8. Servicing through each 50000 km or 2 years
   + 2.9. Servicing through each 100000 km or 4 years
+ 3. Engines
+ 4. Cooling systems, heating
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Suspension bracket and steering
+ 11. Body
+ 12. Electric equipment

2.2. Arrangement of knots and details

GENERAL INFORMATION

Typical arrangement of knots and units in the lower part of a motor compartment

1. Half shaft cover
2. Drain stopper of liquid of automatic transmission
3. Catalytic converter of the exhaust system
4. Cover of the steering mechanism

5. Drain stopper of the oil pallet
6. Rack of a forward suspension bracket
7. Drain union of a radiator
8. Oil filter
9. Support of a disk brake

Typical arrangement of knots in a back part of the bottom

1. Pipe of a mouth of the fuel tank
3. Rack of a back suspension bracket
4. Exhaust pipe

5. Fuel tank
6. Back brake

In this section the information necessary for the owner of the Toyota Corolla car and modifications, for maintenance of high operational qualities of the car, its profitability, traffic safety and durability are supplied.

The main terms of maintenance with the list of necessary works are provided below, and sections with the description of maintenance of each type of works follow further. Visual checks, adjustments, replacement of knots which are included in the description along with other useful recommendations belong to these works. To simplify finding of this or that knot or the unit car device pictures from a motor compartment and the bottom are applied. Maintenance of the car is planned according to a run or term of operation, and the sequence of operations on leaving and service which performance will allow to keep long time the car in good repair is given in the subsequent sections. The order of service is constructed so that obliges to carry out service of all units of the car in the specified terms, the neglect care of separate systems and units reduces efficiency of maintenance.

At Corolla service you will find out that the majority of works can and has to be carried out in common. It is connected with the fact that the order of implementation of separate procedures almost differs in nothing, or with the fact that units absolutely different to destination settle down nearby.

For example, if you lifted the car for any reason, then being under the car you have to check at once and the exhaust system and a suspension bracket and steering and details of fuel system at the same time. At the shift of wheels interfaced to their removal it is expedient to check a condition of brakes and bearings of naves.

At last, let us assume, what you lent or hired a dynamometer key. If you need to tighten only candles, then at the same time you can check also the moments of an inhaling of other fasteners.

The first step on performance of work of this program of maintenance is your self-preparation. Study all sections concerning procedures which you are going to execute make the list and prepare all spare parts and tools necessary for work. If it seems to you that at implementation of the procedure you will not be able independently to cope with any part of works, then address for consultation in local shop selling spare parts, or in department of service of your dealer.

home